ivampiresp/Spdk
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
cd65512d08
Spdk/docker/build_base/pre-install

45 lines
1.0 KiB
Plaintext
Raw Normal View History

docker: Add docker-compose for building basic SPDK containers This suite can be used to deploy containers with the following functionality (more details in README.md): - storage-target - proxy-container - traffic-generator This will run simple fio test as per fio.conf against nvmf controller provided by initiator-container. Similar task can be performed directly from initiator-container as well. Each container includes SPDK installation with most common tools, e.g. rpc.py, available under $PATH. This allows for something like: docker-compose exec storage-target rpc.py nvmf_get_subsystems Note that SPDK environment heavily depends on a running kernel hence all the containers need to be privileged. That said, to make sure containers are not affecting the host too much, some tasks must be done prior running them. This includes: - loading proper kernel modules (like nvme-fabrics, etc.) - allocating hugepages and having at least one hugetlbfs mount available under /dev/hugepages base_build is created as docker multi-stage build. This is done in order to decrease the size of the final image. The SPDK RPMs are built inside a base image and then copied over to the main image (+ fio binary) - this leaves all the dependencies inside the intermediate image instead of the final one. The resulted difference in size may look similar to the following (it may differ depending on the docker version etc.): no multi-stage build: spdk_base == 1.04GB multi-stage build: spdk_base == 261MB Signed-off-by: Michal Berger <michalx.berger@intel.com> Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com> Change-Id: I825bd0d0bb4071bd9d44b6a0749c033894899ae0 Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9055 Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Monica Kenguva <monica.kenguva@intel.com> Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com> Reviewed-by: Changpeng Liu <changpeng.liu@intel.com> Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
2021-08-03 07:16:49 +00:00
#!/usr/bin/env bash
set -e
spdk_repo=$(mktemp -dt "spdk.XXXXXX")
spdk_tar=/spdk.tar.gz
cleanup() {
rm -f "$HOME/rpmbuild/rpm/x86_64/"*.rpm
rm -f "$spdk_tar"
rm -rf "$spdk_repo"
}
trap 'cleanup' EXIT
if [[ ! -e $spdk_tar ]]; then
printf 'Missing %s\n' "$spdk_tar" >&2
exit 1
fi
tar -C "$spdk_repo" -xf "$spdk_tar"
# Required for building RPM
dnf install -y rpm-build
# Spice it a bit with supported sources
"$spdk_repo/scripts/pkgdep.sh" -d
"$spdk_repo/test/common/config/vm_setup.sh" --test-conf=fio
# HACK: In case we received a .tar with built SPDK we need to overwrite the
# configuration to update all the paths make would need to lookup - this is
# needed since we execute inside a different mount namespace so we won't be
spelling: docker Part of #2256 * absolute Change-Id: I8628c449088154c9bd2edf04b3e31d72344f897e Signed-off-by: Josh Soref <jsoref@gmail.com> Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10396 Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com> Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
2021-11-25 01:40:57 +00:00
# able to find any absolute paths that were used prior creating the .tar.
docker: Add docker-compose for building basic SPDK containers This suite can be used to deploy containers with the following functionality (more details in README.md): - storage-target - proxy-container - traffic-generator This will run simple fio test as per fio.conf against nvmf controller provided by initiator-container. Similar task can be performed directly from initiator-container as well. Each container includes SPDK installation with most common tools, e.g. rpc.py, available under $PATH. This allows for something like: docker-compose exec storage-target rpc.py nvmf_get_subsystems Note that SPDK environment heavily depends on a running kernel hence all the containers need to be privileged. That said, to make sure containers are not affecting the host too much, some tasks must be done prior running them. This includes: - loading proper kernel modules (like nvme-fabrics, etc.) - allocating hugepages and having at least one hugetlbfs mount available under /dev/hugepages base_build is created as docker multi-stage build. This is done in order to decrease the size of the final image. The SPDK RPMs are built inside a base image and then copied over to the main image (+ fio binary) - this leaves all the dependencies inside the intermediate image instead of the final one. The resulted difference in size may look similar to the following (it may differ depending on the docker version etc.): no multi-stage build: spdk_base == 1.04GB multi-stage build: spdk_base == 261MB Signed-off-by: Michal Berger <michalx.berger@intel.com> Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com> Change-Id: I825bd0d0bb4071bd9d44b6a0749c033894899ae0 Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9055 Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Monica Kenguva <monica.kenguva@intel.com> Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com> Reviewed-by: Changpeng Liu <changpeng.liu@intel.com> Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
2021-08-03 07:16:49 +00:00
"$spdk_repo/configure" > /dev/null
# Deploy SPDK inside the container
DEPS="no" "$spdk_repo/rpmbuild/rpm.sh" \
--with-shared \
docker: Add virtio traffic generator Expand the traffic generator container into two: - traffic-generator-nvme, which uses NVMe-oF to connect to proxy-container - traffic-generator-virtio, which uses Virtio to connect to proxy-container Added second device Malloc device in storage-target, and second subsystem shared between storage-target and proxy-container. The proxy-container and traffic-generator-virtio share named volume in order to pass the vhost socket file. Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com> Change-Id: I889dc19f523255f10b22e15f5e5f437b33ae796d Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9667 Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com> Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com> Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
2021-09-27 14:17:10 +00:00
--with-virtio \
docker: Add docker-compose for building basic SPDK containers This suite can be used to deploy containers with the following functionality (more details in README.md): - storage-target - proxy-container - traffic-generator This will run simple fio test as per fio.conf against nvmf controller provided by initiator-container. Similar task can be performed directly from initiator-container as well. Each container includes SPDK installation with most common tools, e.g. rpc.py, available under $PATH. This allows for something like: docker-compose exec storage-target rpc.py nvmf_get_subsystems Note that SPDK environment heavily depends on a running kernel hence all the containers need to be privileged. That said, to make sure containers are not affecting the host too much, some tasks must be done prior running them. This includes: - loading proper kernel modules (like nvme-fabrics, etc.) - allocating hugepages and having at least one hugetlbfs mount available under /dev/hugepages base_build is created as docker multi-stage build. This is done in order to decrease the size of the final image. The SPDK RPMs are built inside a base image and then copied over to the main image (+ fio binary) - this leaves all the dependencies inside the intermediate image instead of the final one. The resulted difference in size may look similar to the following (it may differ depending on the docker version etc.): no multi-stage build: spdk_base == 1.04GB multi-stage build: spdk_base == 261MB Signed-off-by: Michal Berger <michalx.berger@intel.com> Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com> Change-Id: I825bd0d0bb4071bd9d44b6a0749c033894899ae0 Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9055 Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Monica Kenguva <monica.kenguva@intel.com> Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com> Reviewed-by: Changpeng Liu <changpeng.liu@intel.com> Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
2021-08-03 07:16:49 +00:00
--with-fio
mv "$HOME/rpmbuild/rpm/x86_64/"*.rpm /tmp
mv "/usr/src/fio/fio" /tmp
dnf clean all
Reference in New Issue Copy Permalink