Spdk/test/unit/lib/bdev/raid/bdev_raid.c/Makefile

#  SPDX-License-Identifier: BSD-3-Clause
#  Copyright (C) 2016 Intel Corporation.
#  All rights reserved.
#

SPDK_ROOT_DIR := $(abspath $(CURDIR)/../../../../../..)

TEST_FILE = bdev_raid_ut.c

include $(SPDK_ROOT_DIR)/mk/spdk.unittest.mk
Replace most BSD 3-clause license text with SPDX identifier. Many open source projects have moved to using SPDX identifiers to specify license information, reducing the amount of boilerplate code in every source file. This patch replaces the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause identifier. Almost all of these files share the exact same license text, and this patch only modifies the files that contain the most common license text. There can be slight variations because the third clause contains company names - most say "Intel Corporation", but there are instances for Nvidia, Samsung, Eideticom and even "the copyright holder". Used a bash script to automate replacement of the license text with SPDX identifier which is checked into scripts/spdx.sh. Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780 Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904 Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com> Community-CI: Mellanox Build Bot Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com> Reviewed-by: Changpeng Liu <changpeng.liu@intel.com> Reviewed-by: Dong Yi <dongx.yi@intel.com> Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com> Reviewed-by: Paul Luse <paul.e.luse@intel.com> Reviewed-by: <qun.wan@intel.com> 2022-06-03 19:15:11 +00:00			`# SPDX-License-Identifier: BSD-3-Clause`
update Intel copyright notices per Intel policy to include file commit date using git cmd below. The policy does not apply to non-Intel (C) notices. git log --follow -C90% --format=%ad --date default <file> \| tail -1 and then pull just the 4 digit year from the result. Intel copyrights were not added to files where Intel either had no contribution ot the contribution lacked substance (ie license header updates, formatting changes, etc). Contribution date used "--follow -C95%" to get the most accurate date. Note that several files in this patch didn't end the license/(c) block with a blank comment line so these were added as the vast majority of files do have this last blank line. Simply there for consistency. Signed-off-by: paul luse <paul.e.luse@intel.com> Change-Id: Id5b7ce4f658fe87132f14139ead58d6e285c04d4 Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15192 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Community-CI: Mellanox Build Bot 2022-11-01 20:26:26 +00:00			`# Copyright (C) 2016 Intel Corporation.`
bdev: add raid bdev module Raid module: ============ - SPDK raid bdev module is a new bdev module which is responsible for striping various NVMe devices and expose the raid bdev to bdev layer which would enhance the performance and capacity. - It can support theoretically 256 base devices (currently it is being tested max upto 8 base devices) - Multiple strip sizes like 32KB, 64KB, 128KB, 256KB, 512KB etc is supported. Most of the current testing is focused on 64KB strip size. - New RPC commands like "create raid bdev", "destroy raid bdev" and "get raid bdevs" are introduced to configure raid bdev dynamically in a running SPDK system. - Currently raid bdev configuration parameters are persisted in the current SPDK configuration file for across reboot support. DDF will be introduced later. High level testing done: ======================= - Raid bdev is created with 8 base NVMe devices via configuration file and is exposed to initiator via existing methods. Initiator is able to see a single NVMe namespace with capacity equal to sum of the minimum capacities of 8 devices. Initiator was able to run raw read/write workload, file system workload etc (tested with XFS file system workload). - Multiple raid bdevs are also created and exposed to initiator and tested with file system and other workloads for read/write IO. - LVS / LVOL are created over raid bdev and exposed to initiator. Testing was done for raw read/write workloads and XFS file system workloads. - RPC testing is done where on the running SPDK system raid bdevs are created out of NVMe base devices. These raid bdevs (and LVOLs over raid bdevs) are then exposed to initiator and IO workload was tested for raw read/write and XFS file system workload. - RPC testing is done for delete raid bdevs where all raid bdevs are deleted in running SPDK system. - RPC testing is done for get raid bdevs where existing list of raid bdev names is printed (it can be all raid bdevs or only online or only configuring or only offline). - RPC testing is done where raid bdevs and underlying NVMe devices relationship was returned in JSON RPC commands Change-Id: I10ae1266f8f2cca3c106e4df8c1c0993ddf435d8 Signed-off-by: Kunal Sablok <kunal.sablok@intel.com> Reviewed-on: https://review.gerrithub.io/410484 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com> 2018-05-08 11:30:29 +00:00			`# All rights reserved.`
			`#`

ut/raid: put bdev_raid.c into 'raid' subdirectory To make room for other raid module unit tests. Change-Id: Icf8b8ff0c9051ccb4c7ebd784807370f8be1a8fb Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/853 Reviewed-by: Paul Luse <paul.e.luse@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com> Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> 2020-02-03 11:33:41 +00:00			`SPDK_ROOT_DIR := $(abspath $(CURDIR)/../../../../../..)`
bdev: add raid bdev module Raid module: ============ - SPDK raid bdev module is a new bdev module which is responsible for striping various NVMe devices and expose the raid bdev to bdev layer which would enhance the performance and capacity. - It can support theoretically 256 base devices (currently it is being tested max upto 8 base devices) - Multiple strip sizes like 32KB, 64KB, 128KB, 256KB, 512KB etc is supported. Most of the current testing is focused on 64KB strip size. - New RPC commands like "create raid bdev", "destroy raid bdev" and "get raid bdevs" are introduced to configure raid bdev dynamically in a running SPDK system. - Currently raid bdev configuration parameters are persisted in the current SPDK configuration file for across reboot support. DDF will be introduced later. High level testing done: ======================= - Raid bdev is created with 8 base NVMe devices via configuration file and is exposed to initiator via existing methods. Initiator is able to see a single NVMe namespace with capacity equal to sum of the minimum capacities of 8 devices. Initiator was able to run raw read/write workload, file system workload etc (tested with XFS file system workload). - Multiple raid bdevs are also created and exposed to initiator and tested with file system and other workloads for read/write IO. - LVS / LVOL are created over raid bdev and exposed to initiator. Testing was done for raw read/write workloads and XFS file system workloads. - RPC testing is done where on the running SPDK system raid bdevs are created out of NVMe base devices. These raid bdevs (and LVOLs over raid bdevs) are then exposed to initiator and IO workload was tested for raw read/write and XFS file system workload. - RPC testing is done for delete raid bdevs where all raid bdevs are deleted in running SPDK system. - RPC testing is done for get raid bdevs where existing list of raid bdev names is printed (it can be all raid bdevs or only online or only configuring or only offline). - RPC testing is done where raid bdevs and underlying NVMe devices relationship was returned in JSON RPC commands Change-Id: I10ae1266f8f2cca3c106e4df8c1c0993ddf435d8 Signed-off-by: Kunal Sablok <kunal.sablok@intel.com> Reviewed-on: https://review.gerrithub.io/410484 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com> 2018-05-08 11:30:29 +00:00
test: use spdk_unittest.mk for raid unit tests Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: I925bf71414fe74868eb14faf365e09258fea87eb Reviewed-on: https://review.gerrithub.io/421177 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Kunal Sablok <kunal.sablok@intel.com> 2018-08-02 21:30:47 +00:00			`TEST_FILE = bdev_raid_ut.c`
bdev: add raid bdev module Raid module: ============ - SPDK raid bdev module is a new bdev module which is responsible for striping various NVMe devices and expose the raid bdev to bdev layer which would enhance the performance and capacity. - It can support theoretically 256 base devices (currently it is being tested max upto 8 base devices) - Multiple strip sizes like 32KB, 64KB, 128KB, 256KB, 512KB etc is supported. Most of the current testing is focused on 64KB strip size. - New RPC commands like "create raid bdev", "destroy raid bdev" and "get raid bdevs" are introduced to configure raid bdev dynamically in a running SPDK system. - Currently raid bdev configuration parameters are persisted in the current SPDK configuration file for across reboot support. DDF will be introduced later. High level testing done: ======================= - Raid bdev is created with 8 base NVMe devices via configuration file and is exposed to initiator via existing methods. Initiator is able to see a single NVMe namespace with capacity equal to sum of the minimum capacities of 8 devices. Initiator was able to run raw read/write workload, file system workload etc (tested with XFS file system workload). - Multiple raid bdevs are also created and exposed to initiator and tested with file system and other workloads for read/write IO. - LVS / LVOL are created over raid bdev and exposed to initiator. Testing was done for raw read/write workloads and XFS file system workloads. - RPC testing is done where on the running SPDK system raid bdevs are created out of NVMe base devices. These raid bdevs (and LVOLs over raid bdevs) are then exposed to initiator and IO workload was tested for raw read/write and XFS file system workload. - RPC testing is done for delete raid bdevs where all raid bdevs are deleted in running SPDK system. - RPC testing is done for get raid bdevs where existing list of raid bdev names is printed (it can be all raid bdevs or only online or only configuring or only offline). - RPC testing is done where raid bdevs and underlying NVMe devices relationship was returned in JSON RPC commands Change-Id: I10ae1266f8f2cca3c106e4df8c1c0993ddf435d8 Signed-off-by: Kunal Sablok <kunal.sablok@intel.com> Reviewed-on: https://review.gerrithub.io/410484 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com> 2018-05-08 11:30:29 +00:00
test: use spdk_unittest.mk for raid unit tests Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: I925bf71414fe74868eb14faf365e09258fea87eb Reviewed-on: https://review.gerrithub.io/421177 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Kunal Sablok <kunal.sablok@intel.com> 2018-08-02 21:30:47 +00:00			`include $(SPDK_ROOT_DIR)/mk/spdk.unittest.mk`